HARMAN KARDON AVR7300
Instrukcja Serwisowa

AVR7300

harman/kardon

MAIN REMOTE CONTROL FUNCTIONS
s Transport Fast-Play/Scan Buttons: These buttons have no direct function on the AVR 7300, but they are used when the remote is programmed for a compatible DVD, CD or tape player. Pressing these buttons will transmit a fast-play forward, fast-play reverse, or fast-forward or fast-reverse scan command, according to the capabilities of the player being controlled. In the factory default setting, these buttons are preprogrammed with the remote codes for Harman Kardon DVD players so that you may control a compatible player even when the remote is directly controlling the AVR, a TV set, or a cable or satellite set-top box. J Main Transport Controls: These buttons have no direct function on the AVR 7300 but are used when the remote is programmed for a compatible DVD, CD or tape player. Pressing these buttons will transmit a stop (�), record (�), or pause (±) command, according to the capabilities of the player being controlled. In the factory default setting, these buttons are programmed with the remote codes for Harman Kardon DVD players so that you may control a compatible player even when the remote is directly controlling the AVR, a TV set, or a cable or satellite set-top box. K Track Skip Up/Down Buttons: These buttons do not have a direct function with the AVR 7300, but when used with a compatibly programmed CD or DVD changer will change the track or chapter currently being played. In the factory default setting, these buttons are programmed with the remote codes for Harman Kardon DVD players so that you may control a compatible player even when the remote is directly controlling the AVR, a TV set, or a cable or satellite set-top box. L Preset Up/Down Button: When the tuner is in use, press this button to scroll through the stations programmed into the AVR 7300�s memory. w Tuning Up/Down Button: Press this button when the tuner is in use to change the station to one with a higher or lower frequency. When the tuner is in the MANUAL/MONO mode, each tap of the selector will increase or decrease the frequency by one increment. When the tuner receives a strongenough signal for adequate reception, MANUAL TUNED will appear in the Lower Display Line $ and in the on-screen display. When the tuner is in the AUTO/STEREO mode, press the button once, and the tuner will scan for a station with acceptable signal strength. When the next higher- or lowerfrequency station with a strong-enough signal is tuned, the frequency scan will stop and the Lower Display Line $ and the on-screen display will indicate AUTO TUNED. When an FM Stereo station is tuned, the display will read AUTO ST TUNED. See page 35 for more information on using the tuner. N Disc Skip Button: This button has no direct function for the AVR 7300 but may be used to change the disc in a CD or DVD changer when the remote is programmed for that type of device. O Program Button: This button is used to begin the process of programming the remote. Press and hold this button for three seconds to place the remote in the programming mode. Once the red LED under the Set Button q lights, release the button. You may then select from the desired option. (See pages 46 � 55 for more information on configuring the remote.) P Light Button: Press this button to activate the remote�s backlight for ease of use in darkened rooms. Q Multiroom Button: Press this button to begin the process of activating the multiroom system or to change the input or volume level for the second zone. (See page 44 for more information on the multiroom system.) R Macro Buttons: Press these buttons to store or recall a �Macro�, which is a preprogrammed sequence of commands stored in the remote. (See page 49 for more information on macros.) S Sleep Button: Press this button to place the unit in the Sleep mode. After the time shown in the display, the AVR 7300 will automatically go into the Standby mode. Each press of the button changes the time until turn-off in the following order: U OSD Button: Press this button to activate or turn off the On-Screen Display (OSD) system used to set up or adjust the AVR 7300�s parameters. V Tone Control Button: This button controls the tone mode settings, enabling adjustment of the bass and treble boost/cut. You may also use it to take the tone controls out of the signal path completely for �flat� response. The first press of the button displays a TONE IN message in the Lower Display Line $ and in the on-screen display. To take the controls out of the signal path, press either of the �/¤ Navigation Buttons o until the display reads TONE OUT. To change the bass or treble settings, press the button again until the desired option appears in the Lower Display Line $ and on-screen display and then press either of the �/¤ Navigation Buttons o to enter the desired boost or cut setting. See page 35 for more information on the tone controls. W Mute Button: Press this button to momentarily silence the AVR 7300 or TV set being controlled, depending on which device has been selected. X AM/FM Button: Press this button to select the AVR 7300�s tuner as the listening choice. Pressing this button when the tuner is already in use will select between the AM and FM bands. Y Channel Up/Down Selector: These selectors share the disc in the lower portion of the remote with the Volume Up/Down Buttons H. They have no function when the AVR is being controlled, but when programmed for use with a VCR, TV, cable box, satellite receiver or other similar product, they will change the channel up or down. See pages 46 � 55 for more information on programming the remote. Z Transport Play Buttons: These buttons have no direct function on the AVR 7300, but they are used when the remote is programmed for a compatible DVD, CD or tape player. Pressing these buttons will transmit a forward- or reverse-play command, according to the capabilities of the player being controlled. In the factory default setting, these buttons are programmed for Harman Kardon DVD players so that you may control a compatible player even when the remote is directly controlling the AVR, a TV set or a cable or satellite set-top box.

When the Sleep timer is in use, the front-panel displays and other indicators will dim to half-brightness. T Night Mode Button: Press this button to activate the Night mode. This mode is available in specially encoded Dolby Digital sources, and it preserves dialogue (center channel) intelligibility at low volume levels.

16

MAIN REMOTE CONTROL FUNCTIONS

15